PE2 commands:
1 <jdp-rtr-pe-02>display interface GigabitEthernet 3/0/0
displays interface details, complete
2 <jdp-rtr-pe-02>display interface GigabitEthernet 1/0/20.2877
displays interface details, vlan based
3 <jdp-rtr-pe-02>ping -vpn-
Reply from 172.29.101 106 bytes-56 Sequence=1 ttl=255 time=1ms
4. Display interface serial <port>
Display data of serial port, loop detection can also be seen
5. Display arp interface gi port.vlan
Displays Mac address
______________________________
Mgmt Router Commands:
1 Creation of ILL in mgmt
>System-view
vlan 2658
>description JDVNLL_ill 25mb
Quit
Interface gigabitethernet 1/0/0
Port trunk allow-pass vlan 2658
Quit
Interface gigabitethernet 1/0/10
Port trunk allow-pass vlan 2658
Quit
interface vlan 2658
Description JDVVNL_ill_2mb
Bandwidth25600
Ip address 117 201 251.225 255.255.255.240
Quit
Save
2. Deletion of ILL
System-view
Display ip interface brief | inc 117.252.0.0
Display vlan 2634
Display this
Undo bandwirth
Undo ip address
Undo descrition
Display interface vlan 2643
Display int gi 1/0/0
Undo trunk allow-pass vian 2643
Quit
Display int gi 2/0/4
Undo trunk allow-pass vlan 2643
Quit
Undo int vlan 2643
Undo vlan 2643
Quit
Save
3. To check mac of remote end.
Display mac-address vlan <>
Display mac-address int gi 1/0/0
Display ip interface brief | inc 117.240.15.1
______________________________
Tier 1 and tier 2 commands
1. Show interface 3/2
(to check status and configuration of a port)
2. Show vlan 3051
(to see ports on which vlan is passed)
3. Show fdb 2/1 1 100 (for mac)
4. Show counters ospi obj 3/2 (for optical power)
______________________________
BNG 1 and BNG 2 Commands:
show CONTEXT all (Displays ALL THE CONTEXT exist in BNG)
> [bsnl.in]show subscribers all (Display the list of connected users, with port,vlan and
connected time)
> [bsnl.in]show subscriber active username shilajayesh@bsnl.in (Displays about i/p.ip pool, VLAN, profile and many)
[bsnl.in]show ip pool (Displays ip pool details)
[bsnl.in]show subscribers summary all (Provides the summary of connected subscribers)
[mgmt]show pppoe subscribers 1/4 vlan-id 2314
[mgmt]show pppoe subscribers 1/4 vlan-id 2314 summary
[bsnl.in]show subscribers active user nibahdipty@bsnl.in
Cont (mgmt) show pppoe subscriber 1/1 vlan-id 2086:365 will give subscriber username details and mac address.
[bsnl.in] show port all (Displays all the ports) & in following ports are the uplinks ports so remaining ports are download ports.
[bsnl.in]show ip interface brief | inc 218.248.165.5
mgmt show arp (Displays all DSLAMS and OCLANS info)
[mgmt]show pppoe subscribers 6/2 vlan-id 2308 (GIVES THE DETAILS OF LOGGING B/B CONNECTIONS)
[bsnl.in]sho pppoe subscribers 11/2 vlan-id 2356 summary (Displays total pppoe connections in outer VLAN 2356)
To check login of vpn numbers
Cont rajpostal.in
[rajpostal in] Show sub act | grep options-a15 192.168.93 38 (static ip attached to vpn number)
Cont voip-cdot
[voip-cdot] Show ip int brief
Cont mgmt
[mgmt] show config port | Inc 3047
to view vlan passed
Cont local
[local]Show radius server
Upto page 3 done
Cont bb-ill
[bb-ill]Show arp | include vlan 1930
[bsnl.in] show port counters
[ftth.bsnl.in] traceroute 8.8.8.8
[fith.bsnl.in] Show sub log session 9/4 vlan-id 3010:12
[tpartyoltmgmt.in]show arp | inc 3083
[tpartyoltmgmt.in]show circuit detail | inc 3083(to view port of olt in bng)
[ftth.bsnl.in] Show sub log session 9/4 vlan-id 3010:128
______________________________________________________________________
OCLAN
#show arp (Displays the uplink of BNG from OCLAN)
(config)#show inter brief (Display list of interface)
(config)# show vlan brief (Display list of VLANS)
(config)#show inter gei 4/3 (Displays interface detail status)
#show running-config interface fei_2/29 (Displays the configuration of interface 2/29)
#show mac interface fei_2/29 (Display the mac of the interface)
DSLAM ZTE make:
Enable
PWD
Config
Show vlan 743
Interface adsl 13/40
Show interface 13/40 adsl-status
Show interface 13/40 port-status
Shutdown
No shutdown
Show adsl profile
Adsl profile STD MB PROFILE_PRF.
Exit
Save
DSLAM ZTE (OLD)
config terminal
Show vlan 209
Show adsl port info adsl_0/3/18
Show adsl channel adsl_0/3/18
Show adsl physical adsl_0/3/18
Show adsl port status adsl_0/3/18
DSLAM NSN make
Enable
Config terminal
Bridge
Show vlan 505
Show Ire 3/26 xdsl phy-table-linerates
Show Ire 3/26 xdsl band-table
Port Ire 3/26 disable
> Lre 3/26 xdsl chan-config channel1 ADSL4
Port Ire 3/26 enable
Exit
Wr mem
Show Ire 3/26 xdsl chan-conf-info
Card reset (in config mode)
Reset card 3
OLD NSN:
Show Ire 4/5 adsl
Show Ire 4/5 adsl line conf-info
Show xdsl chan-config-profile
DSLAM huawei:
Root
Admin
Enable
Config ter
Show vlan 174 Show adsl line state adsl 0/0/46
Adsl deactive adsl 0/0/46
Show adsl line-profile all
Adsi active adsl 0/0/46 3
Write
Y
Huawei OLD:
Show vlan
Interface adsl 0/1
Adsl line-state
Deactive 0/1
Active 0/1 15
Show board 0
Show line operation all
Exit
Exit
Save
______________________________________________________________________
Disclaimer: The sole purpose of page is to educate a common inquisitive BSNL EMPLOYEE about the basic commands and working of core equipments used for providing services. No any kind of login passwords or usernames can be provided. Miss-use of given commands will be the sole responsibiltiy of the user himself/herself. Website creator/ manager/ owner will not be liable of any kind of missuse.